Applications EPS CORNICES
EPS cornices are machined Expanded Polystyrene mouldings with a density of 20 kg/m³. Our cornices enable us to offer you a wide variety of designs, measurements and sizes. We can also cut any angle. EPS mouldings are the most versatile, economical solution to considerably improve the appearance of a building. They do not need special anchoring or fixing and several mouldings can be made with the same mould. We will also supply you with mould anti-stick for reuse of the moulds if required. Mould anti-stick dosage: it is recommended to apply the first coat of anti-stick diluted with water. The second coat before contact with the concrete must be applied without dilution, the recommended amount is 1 litre for every      20 m², and it should be left to dry. The models shown below are examples, and the measurements of the base and height and even the model format may vary      according to the customer’s request and requirements.
	Table of standard models and measurements.
[back to products] [home]